How to Fix Sys Blue Screen Error
The sys blue screen error (commonly referred to as the Blue Screen of Death, or BSOD) is a nickname for the blue screen that showing on the screen when there is a critical error inside the windows operating system kernel.
If you see the error message featuring a solid blue background that means your windows has encountered a critical error that causes your operating system to become temporarily unstable or unresponsive.
For protecting the operating system from damage, Windows responds by stopping all tasks on your computer, and indicating the problem in the Blue Screen of Death error.
The sys blue screen error was very popular in the earlier versions of windows, and appears a lot less frequently in XP and Vista.
The default settings for XP and Vista automatically restart your computer when a sys blue screen error occurs.
So, you’ll only see a blue flash before the computer restarts.
However, if you want to fix the sys blue screen error, you have to be able to see the error.
By disabling the automatically restart feature, you will be able to gather important information from the error message that will help you resolve the problem properly.
Disabling the sys blue screen error auto-reboot in XP and Vista
If you’re running Windows XP or Vista, and you have noticed that every so often that Windows reboots without asking you, it is because of the sys blue screen error.
If you want to see the error caused the BSOD, you will have to check the error log list.
With this tip, you can disable the Auto-Reboot so you can finally read, and see the sys blue screen error.
1. Go to Start -> Control Panel -> System
2. Go to Advanced
3. Under the Startup and Recovery section, click Settings…
4. Under System Failure un-check “Automatically restart”
How to fix sys blue screen error?
After restart, you can hit the F8 key, to load your windows in safe mode.
You can try then one of the following, according to your BSOD error message:
• Eliminate Visuses, Trojans and any other adware or spyware –
You should run your Adware program to check that your computer is clean from any other adware or spyware.
• Uninstall malfunctioning drivers – Go to start menu, Right click on my computer, select properties.
Go to Hardware, then click on device manager, and you will see a list of all your devices installed on your computer, look for any device that has an exclamation mark next to it.
That would be your malfunctioning device.
• Hard drive Defrag – Defrag your computer and schedule a disk check.
• Fix Registry – Clean and fix your Windows registry using Registry Cleaner Software.
• Replace faulty RAM stick – If it is RAM problem, replace the faulty RAM stick.
We have seen here some of the solutions to the infamous Sys Blue Screen Error. To prevent this error it is most recommended that you keep your computer healthy by using tools like adware removal, registry cleaner and disk defrag, and by also pay attention to your troubleshooting of new drivers installed.